JavaScript Menu, DHTML Menu Powered By Milonic
Diana Lin Design LLC :: LED lighting Products : d°light Technical Specs
d°light Instruction + Caution:::

silicone with LED lights
d°light Huggable integrates the hardware of...
• the latest LED technology
    …Warm white 0.5 watt LED at higher color temperature
    …Low power, low heat, drive current of 120mA per LED
    …View tech drawing of LED
• utilizes the natural translucency of silicone rubber as the LED lens

d°light Huggable power source:
• turn d°light Huggable on/off by pulling the chain switch
• 4 AA batteries (we recommend 2500MAH rechargeable batteries, more juice and better for the environment!) d°light Huggable will last about 4 hours at its brightest and then dim off slowly...
• ONLY USE AC/DC adapter provided by Diana Lin Design
• Use only rechargeable Ni-Cd/Ni-MH batteries ONLY!!
::rechargeable batteries are not included.

CAUTIONS :

  • Always unplug the AC adapter when not in use.
  • Do not use, place or store the charger where it may come into contact with water or moisture.
  • Always replace frayed or damaged wire and broken plugs immediately.
  • Always unplug the battery box from the power source before cleaning.
  • Do not short-circuit the metal contacts of the charger.
  • Do not disassemble, deform or reconstruct any part of the unit.
  • Use this battery box with the AC adapter included in the package only.

    • fabric cover
    with the soft touch of textile and fabric...
    • 100% woven polyester
    • 100% polyester satin

    Downloadable important documents:

    Click here to download d°light user instructions
    		  
    Click here to download charger instruction and caution PDF
    		   Click here to download AC/DC adapter specs
    User Instructions

    		  Charger Caution & Instructions   AC/DC Adapter Specs.
           

    IMPORTANT NOTICE:
    Please make sure your d°light is turned off when charging your batteries. If your d°light is turned on, the battery will NOT charge.

       

    		In order to make a d°light Huggable (or d°light UrHeart), you need three components: LED silicone bubbles, a d°light cover of your choice and the battery charger. 

    Step 1: Stuff the LED silicone bubbles into the d°light cover. Make sure you get all the corners first, just like putting a comforter into the comforter cover.

    Step 2: Plug in the LED silicone bubbles in to the "output" of the battery charger.

    Step 3: Insert rechargeable AA batteries. (Note: it's very IMPORTANT that you ONLY use RECHARGEABLE batteries!)

    Step 4: Remove the logo tag from the battery charger and slip the pull chain through the small hold on the d°light cover. Then clip the logo tag back onto the battery charger.

    Step 5: Place the battery charger inside the d°light cover, then zip up.

    Step 6: Give the pull chain a little tug to turn on your d°light Huggable! (Please make sure the batteries are charged for the lights to turn on.)

      ©2011 Diana Lin design LLC, All rights reserved
    go back Back go back Diana Lin Designs